Apple Watch Series 3 is a popular smartwatch with a lot of features that make it a great device for staying connected and tracking your fitness goals. However, accidents happen, and sometimes the screen of the Apple Watch Series 3 can get cracked or damaged. If you find yourself in this situation, don’t worry! Apple Watch Series 3 screen replacement is possible, and in this article, we’ll guide you through the process.
Before we dive into the details of how to replace the screen on your Apple Watch Series 3, it’s important to note that this is not a task for everyone. If you don’t have experience with electronics or don’t feel comfortable working with small parts, we recommend that you take your Apple Watch to a professional for repair. Attempting to replace the screen yourself could cause further damage to the device, and you could end up spending more money than if you had taken it to a professional in the first place.
If you’re up for the challenge and want to attempt an Apple Watch Series 3 screen replacement on your own, here’s what you’ll need:
Once you have all of these items, you’re ready to begin the screen replacement process.
Step 1: Remove the screen
The first step in the process is to remove the damaged screen from your Apple Watch Series 3. To do this, you’ll need to use a prying tool to carefully pry off the screen. Start at one corner of the screen and work your way around the edges, being careful not to damage any of the other components in the process.
Step 2: Disconnect the battery
Once you have removed the screen, you’ll need to disconnect the battery from the motherboard to prevent any electrical damage. You can do this by using a small screwdriver to loosen the two screws holding the battery connector in place. Once you’ve loosened the screws, gently lift the battery connector away from the motherboard.
Step 3: Remove the adhesive
Next, you’ll need to remove the adhesive that is holding the broken screen in place. You can use a heat gun or hair dryer to soften the adhesive, making it easier to remove. Once the adhesive is soft, you can use your prying tool to gently lift the broken screen away from the casing.
Step 4: Install the new screen
Now it’s time to install the new screen. Start by peeling off the adhesive backing on the new screen and carefully aligning it with the casing of the Apple Watch Series 3. Once the screen is in place, press down firmly to ensure that it is securely attached.
Step 5: Reconnect the battery
With the new screen in place, you can now reconnect the battery to the motherboard. Gently press the battery connector back into place and use your screwdriver to tighten the two screws that hold it in place.
Step 6: Test the new screen
Finally, it’s time to test the new screen to make sure that it is working properly. Reassemble your Apple Watch Series 3 by carefully pressing the screen back into place and snapping it into the casing. Turn on your watch and make sure that the screen is responding to touch and displaying images correctly.
In conclusion, replacing the screen on your Apple Watch Series 3 is possible, but it’s not a task for everyone. If you’re comfortable working with small parts and have experience with electronics, you can attempt the screen replacement process on your own. However, if you’re not confident in your abilities, we recommend that you take your watch to a professional for repair. By following the steps outlined in this article and taking your time, you can
